Thursday, November 15, 2012

Fabric Evergreen

It has been a while since I've posted a tutorial, and what better time than now? We are all getting crafty for the holidays! This is one of my favorite homemade craft decorations that stays up long after Christmas has passed; I consider it a Winter decoration, not a holiday decoration.

The Fabric Evergreen


and the best part is that it requires absolutely NO SEWING!

1. choose your fabric (amount depends on the end size, but a fat quarter should be more than enough)
2. choose your styrofoam cone (any size you like)
3. grab a box of dress pins (also called straight pins; the small silver ones with a flat top)
4. cut a strip of fabric, to wrap around the base of the cone, about 2 inches wide
5. pin the fabric strip into place from the bottom of the cone (leave the sides un-pinned for now)
6. cut the rest of your material into 2x2 inch squares & pin one over the tip of the cone
7. next, fold a square of material in half and then in half again, so you are left with a 1x1 inch square (or diamond)
8. turn your cone upside-down and place the tip of the folded diamond corner over the fabric strip, just touching the bottom edge of the cone
9. pin the right corner of the diamond to the cone (pin should also hold the strip to the side of the cone)
10. repeat with the next square of material, overlapping the folded diamond side corners
11. once the row is complete, start the next row by off-setting the diamond point
12. continue until you reach the top of the cone

I hope these instruction made sense... I forgot to take photos as I worked.  I will be making more of these Fabric Evergreens in various sizes, so I will add additional photos later.

1 comment:

  1. Cute tree! Thanks for the tutorial, I might have to try this out.
    Amanda

    ReplyDelete